Search results

2022 kenevo expert down to £4400 with delivery at Infinity Cycles.

Has anyone got a chainstay bolt for a 2018 levo comp carbon I can buy? I ordered a bolt kit from Berkshire cycles but the wrong kit has arrived. The bolt is 110mm long and 12mm in diameter. Thanks

If anyone has an exploded diagram that would be great. I have looked online but have only found ones for newer models.

Did think it was something to do with the pivot bolt at the chainsay but can't see where they would go. Thanks

I've got my brose 1.3 motor back from performance line bearings. Started to install and I have 2 plastic washer/spacers (see photo) and have totally forgotten where they go. I've just taken out the motor, nothing else. Bike is 2018 specialized comp carbon. Anybody able to help? Cheers Matt

Get

https://www.evanscycles.com/brand/fox/enduro-d3o-elbow-guard-933818?utm_source=rakuten&utm_medium=affiliate&utm_campaign=digidip&utm_content=10&utm_term=3001042&ranMID=45658&ranEAID=hL3Qp0zRBOc&ranSiteID=hL3Qp0zRBOc-t3KU4hKT6HpagBdHj5wYfg#colcode=93381803 Hope this helps someone.

Looking for front and rear code rsc levers. Might take rear lever only. Thanks

Hope this helps someone, just ordered. https://www.hotukdeals.com/deals/five-ten-trailcross-gore-tex-gtx-mtb-mountain-bike-shoes-ps105-at-adidas-app-only-3777001

Thanks, the air can now moves. I think it's one of the white plastic split seals at the top of the can, it doesn't seat properly.

Hi, I just went to change the volume spacer, let out all the air, unscrewed aircan, loud pop. Now the air can is stuck at the bottom of the shock. As I pump it up it doesn't move and the air leaks out. Rebuild? Thanks

Does this include motors?

2018 levo,getting a new motor installed now, have Brose changed anything to improve reliability?

Thanks for this, did you notice a big difference with the charger over the motion control?

Ok, I've done a bit more research. The charger 2 rct is compatible with both my forks. So surely my normal charger from the pike would fit?Anyone done this before I start pulling things apart. Thanks again

Hi, I have a spare pike with a charger damper (see photo). Would this fit into my 2018 revelation? I've put a 160mm air spring in the rev, if this makes a difference.thanks in advance.

Would this fit a spes 2018 comp carbon?

Thanks, the small port on the air spring was blocked with grease . I let the air out, took off the top cap and pulled up really hard a few times. There was a pop sound and the forks equalised. The fork is now much better.

Should the forks compress when I release all the air from them? Bike is on the ground. They are also hard to extend when empty of air. cheers