Search results for query: *

I bought all the bearings and the RRP tool. Do I need to drop the motor to get the main pivot bearings out or is it possble to remove the dust shield to gain access. What are the torque specs for all the pivots and shock bolts? Thanks!

I have over 7000 miles and two years on mine. I wore out a couple of the plastic planetary gears (gear with magnet) and switched to the aluminum gear which wore the sun gear (attached to the axle). The ring gear (big gear attached to the rotor) and cover are bullet proof and never show signs of...

Bike / Product Year: 2019 Manufacturer: LSS Version 2.0 Planetary Gear set Model: Version 2.0 for 2019 Specialized Turbo Levo 2019 Specialized Turbo Levo Comp 2019 Specialized Turbo Levo Comp Carbon 2019 Specialized Turbo Kenevo Comp Asking Price: $60 plus shipping Location Burbank, CA USA...

I have / had it on my Garmin 520 and upgraded to a 530. It works the same as it did on the 520.

Thanks! I just ordered the two piece set. I will report back when installed.

My Sun gear has worn out after 3500 miles! I have been using the Aluminum Planetary gear. It has gotten extremely noisy and the power cuts out. The bike is back to normal with it removed. Can I purchase a new Sun Gear V2.0? Thanks!

I now have 2000 miles on my LSS. The narrow planetary gear (V2) is showing signs of wear and is noisy but still works perfectly. I am going to purchase the aluminum gear to replace it. Does anybody need a V1 ring gear, clip for the Sram rotor and V1 planetary gear with a magnet glued into it...

I am getting the error message too! I updated the App recently but don't really connect to the bike that often. Is this really a software glitch. I am on an iOS device. Anybody get this on an Android device?

Yes, I replaced my Sram components with Shimano XT. JD prototyped the Ice Tech mount for me. I have 1250 trouble free miles on my LSS.

It was designed for the stock Sram rotors on the Levo. You can purchase Shimano Ice Tech Rotors and use this clip... Beta - LSS Clip For Shimano Ice Tech Rotor by JD_3D on Shapeways

Was the cover designed to spin with the axle or stay stationary? Mine doesn't rotate because it hits the swing arm slightly. FYI, I have 768 trouble free miles on mine!

The axle has to be in the center of the rotor and hub! It is a optical illusion the way the photo is taken. It is not rubbing the frame. The dust cover is stationary so a little interference is not going to kill you. V1 was too wide and the dust cover touched the swing arm which caused it to sit...

Here is what you have been waiting for! The LSS now works with Shimano 203mm Ice Tech rotors. I sent JD a rotor and he created a file for a prototype clip to secure the LSS ring gear to the Ice Tech rotor. The fit is flawless and clearance is perfect. It is best to use the V2 LSS as it is...

jd_3d did you ever come up with a solution to mount it to a Shimano Ice Tech Rotor? I purchased a LSS and never installed it and have switched my brakes over to four piston XT. I think a new retaining clip ring is all we need. Make it 5mm larger and bevel it down around the edges. PM your...

@balbo the field does display the power setting! Off / Eco / Trail / Turbo along with the battery percentage. @JanCapek have you addressed my posts? Your field causes the Garmin 520 to freeze when it is not connected to an Ebike.

I removed the eBike field for my 70 mile ride and no issues! While I was telling the story to my buddy who has the field on his 520, His froze up. There is an issue with 520 compatibility when it can't find the ebike.

My Garmin 520 locked up twice today on my 50 mile non eBike ride. Once after a half hour break. Is it constantly searching to connect to an eBike? I am going to remove it and see what happens tomorrow on a 70 mile no eBike ride.

My 520 has been buggy ever since the install. First eMTB ride was okay (short) but on a 50 mile non ebike road ride the 520 froze twice. Battery died in the middle of eMTB ride last night so I need to do more testing on longer eMTB rides.

I successfully set it up on my Edge 520! How do I get it to show battery percentage in one field and power level in one field? It has both batter and power in one field. When I configure it for 2 or more fields, I get the same data in all fields. I have one page with percent and power level 3...