Search results for query: *

I am having alot of trouble sourcing replacement headset bearings here in US. Giant store closed and cant seem to get any help from Giant retailers. The bearing numbers I have are upper TH MR122 1-1/8" (36 X 45) G2 lower TH MR229 1.8" (36 X 45) H2 I have found a TH MMR229 1.8 (36x45) F2...

It seems my bike is missing the x474 15x19x2 washer between yoke and linkage arm on drive side, non drive side has the washer and a small gap between yoke and linkage arm. Drive side yoke touches the linkage arm. I am getting some creaking from shock and noticed in blue papers it calls for a...

Anyone pulled and replaced their suspension bearings? I am wondering what tool I need to remove and install the new bearings. I found this kit GIANT REIGN E+ BEARING KIT but they don't list the bearing numbers. Would a regular bearing puller work or do I need a blind bearing puller? thanks!

I have a shimano branded hub with microspline body and its making some noise. Can I just swap out the freehub body with a micro spline free hub body?

Anyone know where in USA I can get the dust cover for the acros is42/52 headset dust cover? I have the acros interlocking spaces and stem and want to change the stem. Would any is42 dust cover work?

Bike shop refunded me the h30 money. Was supposed to be a swap but did a refund instead. They have a rise h20 for 3699 was 4199 last week. Seems like a better overall spec than the h30 for 3200. Should I saty with h30 or go with h20. The h20 only comes in brown/matte brown which does not...

new rise showed up with some minor ish damage on downtube H30 model send it back or take $100 store credit they are offering if I dont send it back for exchange seems like it is down to bare metal about size of fingertip

https://www.jensonusa.com/Orbea-Rise-H30-20mph-E-Bike-2024 just bought the gloss gray/blue one in large. wanted to try mid power as I have a reign E+2 already

Anyone swap out their housing and cable? My cable is frayed and I can likely replace just the cable but wondered if I had to replace housing do I need to drop the motor? I have battery out and can see the housing just where it enters the motor part of frame.

Sorry if this has been covered but I am swapping coil shock for float x. Do I need to loosen any of the pivot bolts? Or just the lower bolt first then the two trunnion bolts? Dont want to mess anything up. New shock bottom eyelet does not require new bushings? thanks!

I am going to replace the zeb select r fork on 2022 reign e+. know it has the weird sized headtub 1.8. Fork will come with 1.5 tapered steerer. Any easy way to get this fork to fit before I buy it? Enlarger vs reducer crown race? I have seen in the trek rail thread that acros offers a crown...

I charged my 2022 reign e+ last night no problems. Went to finish charging this am and the charger led is now solid red. Ran diagnostic on bike in app and all good from that point. Took battery out of bike tried charging same result Is the charger done? Anyone else have this?

The charger door cver on my reign seems to be missing a screw or something? See the gap on bottom. Normal?

Anyone ever hear of this brand karbon? They have an sl version that is 41 lbs with 75 NM from bafang m820 and 420 wh battery 3 different models. https://www.karbonbikes.com/product-category/mountain-bikes/powerline-sl/

Just curious what others are getting on range. My last ride was 25 miles 1700 ft of elevation about used 68 percent from 96 to 28. Mostly in trail and tour.

I have a 22 Reign E+2 that I have ridden about a year ish. Love the motor and handles chunk like a tank. I am considering getting Rise H20 I believe for 4700 dollars. I have some xc trails I ride right from my house where my full fat is a bit too much sometimes. I ride in mostly in modes 2 or 3...

https://www.giant-bicycles.com/us/reign-eplus-3-20mph-2023

I had my magnet on rear wheel come out the black holder and gave me the speed sensor error. It luckily attached itself to the backside of sram rotor so I was able once I got home to find it. Is this magnet supposed to be attached to the black holder? I added some super glue on backside to hold...

LOL, posted this on M T B R as well and was locked immediately! Love the gatekeeper bit.

Wanted to get some feedback on Trance X and Reign E+ bikes that are aluminum and have cracks in their frames near bottom brackets. I have a small minor issue that was evident when new and has not gotten any bigger as I measure it after couple of rides. I have done about 8 rides and some real...