Search results for query: Installing Magura brakes

The QM 45 adapter is the correct front and rear adapter for the 220mm Magura 6-bolt rotor. Do not stack adapters to achieve the proper fit. The 2020 Rail I have came with a Yari fork setup for a 180mm rotor but an adapter allowed a 203mm rotor. (Suitable for eMTB’s). Like @WilkyWay said, QM 45...

I’m not familiar with the hope 220mm rotor. The frame for the Rail 7 and 9.7 is designed for a 180mm rotor. With some adapters a 203mm rotor is installed with a 4piston calliper. With a 220mm rotor the correct adapter is required. Ensure the rotor circumference lines up with the brake pads...

After crossing around 11000 km on my haibike sduro hardnine 7.0 I suddenly came acros my new bike. A haibike fullnine 10. Went to see it, rode a little test drive on it and took it home ride away. It's my first ride on a fully and was sold ride away. It's an upgrade in every way. From The...

Spot on! and adequately describes the difference between a bleed issue and either poor pad/rotor interface or a hydraulic hose blockage/kink. Poor bleed leads to excess lever travel. Poor rotor/pad interface/ seized pistons/hydraulic hose blockage would mostly result in a firm lever but no ( or...

Hi there, After spending some good amount of money trying to get my SRAM codes to work and failing it’s time to move on ! I’m about to pull the trigger on a set of Magura MT7 brakes with MDR-P 220mm rotors front/back ... I’m planning to install the brakes myself, and possibly shorten the...

Not sure where you've already tried but ive always found Slam69 to stock the Hope kit i couldn't find anywhere else. My local shops are dealers but carry very limited stock (2wheelsonly and runandride). I havent read anything about them using thicker hose on the new brakes, as far as ive read...

Here is first EBike. I did some custom/mods, upgrades and install some more durable drivetrain parts and swapped out some of the components. 😎🤘 SWork Turbo LEVO Gen 2 size S4 large. Dyedbro upper frame protection skin. Use a Wahoo Bolt V2 gps with a 76er top tube enduro mount and a Quadlock...

I have the Decoy Elite with mixed wheel set up and after installing a Shigura brake set-up (Shimano Saint levers and Magura MT7 calipers) using 220mm rotors front and rear on my new Yeti 160e made the same change to my Decoy. You will definitely notice the additional stopping power and be happy...

I believe there are 3 types of available levers . I have, and prefer, the short single finger type(carbon/composite?). I installed the wolf tooth/Magura specific dropper lever too. (Fast delivery). Inboard or outboard is not a problem with fine tuning that adjustment. It’s the rotational...

Have the Shigura set up on all my emtbs and would not consider any other brakes. Haven't had any issues with brake pads rubbing. Have changed pads and rotors with no issues. My buddy installed same set up on his SC Heckler with no issues. Magura rotors are .200 thick where as most manufacturers...

I've posted several times about being 100% satisfied with my Magura MT7/220mm rotor setup. I understand many riders won't need that much breaking power and heat dissipation, but if you need it, you REALLY need it. Recently I switched to HC3 levers so I could adjust the reach and leverage ratio...

I posted this in the wrong thread in all likelihood. Can anyone help me with this conundrum with my recently installed brakes? Is undoubtedly my ignorance. I recently had my brakes upgraded to MT7 Pro. Brakes are spongy so was about to follow folks' bleeding instructions tips and then found...

Maxxis assegai 2.6 fr & Rear Hope cranks 155mm Magura mdrp rotors 220F 203R Burgtec bars Spank split stem ODI grips Shimano xtr chain (stock is rubbish) Pedals are giant brand DH flat pedals These are grippy as these pedals and chew your shoes up too. The brakes are noisy from the metal...

I think the future will be; “Build-a-Bike”. Order the frame you want which comes with a motor and battery. Then put the stuff on that you want. I have a Rail 9.7 2020 that I got in the fall of 2019. The only original items on my bike are the frame, motor and battery. Practically everything...

What rotor size are you riding at the back? I wanted to install Magura brakes with 220mm rotors on my meta power 2021 and it does not fit. See the picture below trying to install Magura brakes. The pistons interfere with the rear triangle. I am wondering if 200mm would fit or if the 2021...

From the factory I upgraded to factory suspension and XT 4piston brakes. I’ve now added one up 210mm droppper, XT 160mm cranks, Raceface Next R bars/Turbine R stem/Next R32 Carbon hoops, SRAM X01 Driverrain shifter/chain/cassette, specialized power pro elaston saddle, Magura MDR-P 220/203...

Hi everyone. I just installed Magura MT7 on my turbo Levo. First I did it myself and now I just pick it up from the Magura dealer. The problem is that the brakes are really not braking hard.... according to the dealer it’s because the pads are new and I should wait until they break in. Is...

Now I have ridden more than 200km. Time for another resume.. Great bike, great fun and exercise! Handle Bar 80cm are wiiiide and tend to hang on a narrow trail in a bush here and there with a good chance for sudden touch down. Got used to the width and will not change to more rise or smaller...

I bled my Maguras once when I installed them a year ago. A year and a few thousand miles later there is no sponginess and the bite point has not moved. I've also had a few crashes. The Magura levers still look and work fine. I have to wonder what you guys are doing wrong that causes your...

I have a question, one I'm hoping the answer to is a yes, but need the more experienced advice and scrutiny. I have the turbo levo SL that come with stock Guide R brakes. I've bought new MT7 Pro and MDRP rotors front and back. I've successfully swopped out the front and bedded in, my gosh...