Search results for query: *

I tried that, but the mech was hitting the cassette, when changing to the larger rings

I have replaced my 10 speed Shimano cues mech, Cassette, etc., that was on my recently built Shimano ep800 powered CEF52, with a 12 speed Deore RD-M6260 Di2 mech, cassette etc., in the process I have realised how little I know about UHD’s and direct mount derailleurs! The frame was supplied with...

An update, I used bsst to check settings, all were set to very low levels of support.I have changed levels and after a short ride in my local woods the motor now runs very well, no more feeling like the brakes are on when I hit 25kph, but it’s still noisy compared to v3 version

I’m passing the bike onto my son - after I have done some tweaks with bsst tool, I’ll get him to feed back about any changes about noise

Dunno, never looked into it.

Standard/trunnion

Something else to consider, the Shimano ep800 motor that was supplied with the frame, cuts off very sharply at 25kph when restricted and feels like the brakes are on when trying to peddle above that speed, I don’t know if the ep801 displays the same behaviour, but mine definitely needs...

Yes, I have M510 4.0 version. Not impressed, motor is very noisy compared to the 3.0 version, and unlike 3.0 it is very difficult to use unsupported - yes I know it’s a e-bike, but when I would hit the 25kph limit with 3.0 the bike could still be peddled ok, with 4.0 when over 25kph, it’s like...

Thanks Mike 👍🏻

Another thing to consider, I wanted cables externally routed, but was supplied with an ICR headset, the top bearing did not have a seal fitted on one side of it and there was no seal to go under the top cap assembly, not ideal for wet, gritty and muddy conditions often encounter here in the UK...

Be mindful of which shock you fit, I originally intended to fit a Fox Float X P.S Elite 205 x 65mm, but it was hitting the frame, see photo

It’s bolted to the bottle cage area.

The battery is attached to a bracket which is then bolted to the frame

Finally, it’s completed. It’s a ‘cheap’ build with used or ‘new old’ kit. I Have only been out for a few non technical rides, it rides well, but I have to put quite a bit of effort in to get the best out of it. It’s noisy compared to either of my Bafang motors (M510/M820). It weighs 23 kilos.

Thanks Mike 👍🏻

Hi Mike, How could I check if I have an old or new M820 - would it be something to do with serial numbers etc.,? Thanks

Hi, my BSST.UC 3. 0. 3 tool stopped working after I tried an online update. Has anyone experienced this? Is there a fix? Thanks

Hi, a very odd thing has developed with my M510 v2 motor which is (was) restricted to 25kph. It has recently started to give support well beyond 25kph! I have not done anything to the motor since I last did some maintenance on it sometime last year. Has anyone else experienced this? Also...

👍🏽

I ordered the frame in December, was informed delivery would be late January, I had not considered that that new year could delay delivery. I already have 2 bafang powered bikes with M510 and M820 motors, my first 2 m510 motors had to be replaced due to various issues, the third has had 3...