Search results

  1. C

    Bafang M820 Firmware thread

    But it is specified as eRoad.. Did anybody try it yet?
  2. C

    LightCarbon LCE930 Member Build Gallery

    True. But be careful, not to drop one of the spacers from the most front motor bolt. It will fall inside of the frame, and the only way to get it out, is than to rotate the bike again..
  3. C

    Bafang m820

    Where do you guys recieve updated firmwares? I would love to try some 43V versions.
  4. C

    M820 Bafang - LIGHTCARBON LCE930 Frame (lightweight)

    I am 71kg + gear. I have 2023 super deluxe ultimete with 450lbs spring. I have lsc and hsc closed and it still feels very plush. But it is still quite easy to bottom it out. Even with the HBO. My shock does have L(ligth) compression tune and considering the levrage rate, it would probably...
  5. C

    M820 Bafang - LIGHTCARBON LCE930 Frame (lightweight)

    https://www.agazzinibike.it/e-bike-lightweight/
  6. C

    BESST tool PRO

    Hi, Is this "Assistance %" possible to set on all motors, like M820, or only on M510, for example?
  7. C

    Bafang m820

    @mike_kelly , @ficorama , if someone would actually open different voltage motors, and check the windings and gearing, that would be great. I would be very interested. I attributed different weight between the EON and M820 to different material being used in the gears, axle(more aluminum and...
  8. C

    Bafang m820

    FW attached, but I don't think there is anything wrong with my unit. Anyway, here is last years review of different ligthweigth motors. One of them is forestal, that has EON drive, (bafang M820 brother)...
  9. C

    Bafang m820

    Other lightweight motors. Fazua, tq, Bosch sx,..
  10. C

    Bafang m820

    You don't have to explain anything to me. M820 is not a bad motor. It has more than enough power and also a lot of torque at low cadence. But, my experience is, that at higher cadencees, torque tapers off a bit faster than with the competition. That's it...
  11. C

    Bafang m820

    Well, ok. High cadence is a bit arbitrary. What is high for some, is not high for others. Spinning at 90rpm is most of the time fine, especially with higher battery percentage. But higher, 120 for example, there is a very noticeable drop in power. For some this is not an issue at all. When...
  12. C

    Bafang m820

    Any news about the M820 succesor? I wouln't mind beter performance at higher cadences...
  13. C

    Bafang M820 Firmware thread

    Any updated 43V firmwares available? That would have more usable torque sensor range?
  14. C

    M820 Bafang - LIGHTCARBON LCE930 Frame (lightweight)

    To utilize the BESST tool, there's no need for disassembly. It connects between your controller and the controller's wire harness, which is accessible without taking anything apart.
  15. C

    New M820 frame from Seraph/TanTan, the E67.

    Regarding the battery going to sleep, I believe it was written before in some other thread before. What turned out to be the case is, that person received the wrong wire harness. Essentially, battery BMS was not connected to the motor, so the only way to wake it up was to plug it in. To check...
  16. C

    M820 Bafang - LIGHTCARBON LCE930 Frame (lightweight)

    I used 3M Rubber Mastic Tape 2228 on the downtube, motor cover and on the seat stay, where there is a possibility of chain bounce on and chipping any paint.
  17. C

    Bafang Go+, is it a new App for all motors ?

    I think this is a HW upgrade, not only SW. So you can't just update version 2 to 3.
  18. C

    M820 Bafang - LIGHTCARBON LCE930 Frame (lightweight)

    Went with this one: https://www.bike24.com/p2741815.html But, as I have said, I haven't installed it yet, so can't comment if it even fits properly. :)
  19. C

    M820 Bafang - LIGHTCARBON LCE930 Frame (lightweight)

    Yes, I have the same issue. It started creaking almost instantly. I took it apart, cleaned, regressed, put it back together, but the problem persisted. I bought new headset, but haven't got the time to install it yet. After installation, it will be clear if it is the issue with the headset or...
  20. C

    Bafang m820

    Does anybody have any information regarding official bafang range extenders? Few months ago, there was discussion, how bafang is developing 36V and 42V range extender, but no news since than.
Top