Was not considered bad enough for warranty. I am in a pretty dry climate so I’ll just keep running it until it’s bad enough, then will pay for a service.
Ran a string line between the front and rear axle drop is measured at 30mm not 15mm…. If a pull up on the seat post to top out the shock while doing this I get 28mm. This method removes any tyre size error to measurement.
Im going into the shop this arvo to see if we can work out if it...
Will try to have it done before warranty ends, just the local store is fairly blasé about it. They were saying wait until it’s totally shat itself. I don’t agree as I think that’s how you get water damage inside
Hey all can anyone check if what I am seeing is correct?
The bb drop should be 15mm in high and 25mm in low. I have it in high.
Drop is measured from an imaginary line between axles. As its mullet I measured the height at the rear to be conservative.
27.5 axle 355mm off the ground, so in...
Has anyone received warranty repair on one of these motors for bearing wear? My drive side bearings have developed some movement that has increased over the last few months. I’m not sure if I should try for warranty now, or just wait till it gets really bad and pay for it after warranty expires.
Was talking to the suspension guy today as my X2 shat itself for the second time, his advice was to go for Superdelux ultimate (air) better reliability and the reign leverage curve need the progression of air… you can get a progressive spring too but kinda defeats the purpose I guess.
Take...
Hi there,
Can anyone help me out with this snap ring on the drive side BB? It’s obviously bent and needs replacing as it’s eating up the seal but I can’t work out what it even is supposed to do? The notch it sits in would have it not touching anything other than the crank arm? Is anyone able to...