Error 21 means engine is not receiving speed sensor signal. Check speed sensor cable connection, verify you connected the cable from sensor port to engine mainboard securely.
they use a standard M6 thread. i guess there might be a resin residue blocking the threads, try removing, scraping it with a pick or thread tap. if that’s resin, there should be no/very little metal shavings
yes, this happens to me as well, also when pedaling without puting high torque on the cranks, "chasing the engine" with pedals. greasing the engine didn't affect this behavior. i suspect this is the large unidirectional needle bearing on the main shaft, rollers resonating mechanically on the...
I'm on V2 size M and for me only 150mm seatpost would fit, and not all the way in because there's a carbon ridge in the frame above charging port to protect the cables.
Guys, did you find a long-term solution to shift cable housing being broken and shift action getting worse due to suspension work? In my first installation I let cable housing pass through the windows without any sleeves, the shifting quickly got worse after a few jumps & drops because the steel...
yes, this happens. mounting the speed sensor vertically like @Ger@anio63 posted helps, but the real long lasting solution for me was adding additional spacers (including spring spacer to prevent sensor rotation) to move the sensor ~3mm inwards.
I got info from Jean they will send me a new chainstay. I used this opportunity to order a spare motor guard and 2 complete sets of spare suspension bearings in the same package (one set is 8xF6901-VRS + 4xF6801-VRS at 1.65$ each bearing). They will pre-route the speed sensor in the chainstay...
Today I was planning to do annual full service including suspension bearings replacement. Upon disassembly and closer inspection I’ve found the crack in the chainstay, which was hidden under the rubber chainstay protector. This must have happened few months ago as the crack resulted in paint...
I had good experience with PSWpower. I bought Tongsheng TSDZ2B kit from them and the included battery performs well, seems to have the advertised capacity. Their support was good. For me the key point was that they ship from EU (warehouse in France) so fast delivery and no additional costs...
I just noticed one of the gaskets in the suspension hinge has broken. These gaskets are made of aluminium and seem to be very fragile. I was very careful not to overtorque them when assembling the bike so I used calibrated torque wrench set to 12Nm. Seems like the material fatigue. Thankfully...
correct
you should not need using bearing press to insert bearings into zero stack headset cups, usually they fit without any resistance
preloading the cap that hard may lead to pulling star nut indeed. using this much force should not be necessary and it won't solve this issue. this is a...
I use BESST. I have 48V system, which is originally 36V engine reprogrammed by SZZT to 48V firmware, so Go app will identify it as 36V using serial number and will update FW to 36V version. This will immediately cause engine error (too high battery voltage) requiring to manually flash 48V...
I do use 12 speed Shimano and as stated above, it takes time to setup and is fragile, ie. once tuned right, will detune fast. The region where downshifting and upshifting is perfect and there's no noticeable chain rubbing on bigger cogs is very narrow. I like having my drivetrain operating...