Recent content by villho

Well, I'm the one who started this thread: both my bike and my self-made extender are live and kicking well.

Thanks for documenting and testing and taking photos. This really shows that there are alternatives to the commercial stuff (y)

How would you plug the BMS for charging? You should have some different connector with... umm... 11 pins at least.

Lithium batteries actually like to be stored in cool/cold. You of course don't get a full power out from a cold li-battery, but storing is different. They do warm up, when you start using them (due to internal resistance), but to get the best output and capacity from them, they should be warmed...

Does the BMS have separate connectors for charging and discharging? I noticed accidentally (after connecting the charger there) that my bluetooth-equipped BMS allows charging through the discharge connectors as well. So yeah, two ideal diodes needed. If getting your pack out for charging takes...

I used a powerful Weller solder iron and nickel strips. Yes, the cell heats up a bit when doing it this way, but I wouldn't worry too much. I also used plastic spacers, but in your case I would try to put the cells in a tight package to minimize the need for space. Solder and nickel strips will...

Which cells do you plan to use? 18650 or 21700? If the latter fit, they'd give a bit more capacity.

Like you said, in that scenario the motor doesn't do anything because the main battery is off. I assume there's some communication required between the motor and the battery and if that doesn't happen, the voltage from the extender is not enough to do anything. I've had many times the main...

Sorry, I actually have 10.22.3. I got confused with "3". These are the settings, which work again after re-installing the app, but which went crazy after enabling Smart HR.

... I removed and re-installed the app and got it to work again with my old settings. I'm sure that enabling Smart HR did something, which I wasn't able to revert again.

I've tried to get my head around with Current Motor and Assistance etc. values. I've been lately really happy with my setup, as I was getting a good range and also a good exercise (i.e. the uphills haven't been too easy, but the bike has assisted just the right amount), but here comes today: I...

Thanks Paolo, I have been doing some tweaking to my settings, and based on your comment, I think I've found the sweet spot. I went yesterday for a 55 km ride and I think that never gotten the average Wh/km such low and also never done so little amount of manual assistance changes during the...

Well, normally I of course try to stay in Eco, but I’m not sure if it’s the singletracks that I normally ride or what, but I often need to be able to quickly change assistance. The tracks that I ride and which are common in the area that I live, are like that one second you may be coming down an...

Thanks for the explanation Paolo. Would it be possible to program a selectable option, which would do this: If rider is pedaling, but stops pedaling suddenly, BLevo would not do any Smart power changes for like 2 secs. It would kind of work like a clutch in a car with manual transmission; it...

One thing still: I don't know, if this might have an impact on registering the assistance level changes when using BLevo, but my iPhone is 8+, so quite a decent amount of processing power, but the Android phone that I used was LG G2, so already an old-ish model. I did not however have any other...