Recent content by Unicycle_DG

  1. Unicycle_DG

    Levo Gen 2 Gen 2 vs Gen 3 Internal Cable Route (ICR) kit cable entry point

    Apologies. I was trying to inform future readers of your valuable and accurate answer. Thank you for answering my question. The kit is $15 plus shipping. Off to Home Depot to source a cheap bolt.
  2. Unicycle_DG

    Levo Gen 2 Gen 2 vs Gen 3 Internal Cable Route (ICR) kit cable entry point

    Found out the answer. Gen2 part number S194200002
  3. Unicycle_DG

    Levo Gen 2 Gen 2 vs Gen 3 Internal Cable Route (ICR) kit cable entry point

    Internal Cable Route (ICR) Port Kit of cable entry point is for Gen 3. Will it also fit MY21 Gen 2 Specialized FSR Turbo Levo Comp Alloy frame? Only one cable (TCU) entry point needed. Also need the “hardware kit” unless I can source a replacement for rounded out 2mm bolt at Home Depot.
  4. Unicycle_DG

    Levo Gen 2 Levo 2019 carbon frame motor install hel

    Same question. Is the shadow loop necessary with a wireless dropper?
  5. Unicycle_DG

    Levo Gen 2 Which Coil Shocks Are Supported on Turbo Levo?

    Is the new Vivid coil compatible with Gen 2 Levo Comp Alloy MY20?
  6. Unicycle_DG

    Levo Gen 2 Cable guide Gen 2 MY21 Levo Comp Alloy

    Appreciate the advice. Allen bolt is the same size as the bolts in the two cable clamps above. I’ve sourced the bolt. New problem. I can’t lower guide, back to its original position, as you can see, the cables are crossed. Don’t want to yank anything out of socket. I’m going to have to take the...
  7. Unicycle_DG

    Levo Gen 2 Cable guide Gen 2 MY21 Levo Comp Alloy

    Missing a fastener for frame cable guide part on MY21 Gen 2 Levo Comp Alloy size medium. What is this part number and what size bolt should be holding it in place?
  8. Unicycle_DG

    Levo Gen 2 Motor not disengaging?

    MY21 Levo Comp Alloy is still kicking, knock wood, after 7k miles. When it dies, I’m shipping it from Kentucky to Franklin TN. If you go that route, let me know your experience with them. eBike Motor Repair 1897 general George Patton Dr. Ste 100 Franklin, TN 37067 Tel: +1 (615) 656-5457...
  9. Unicycle_DG

    Levo Gen 2 Lost a motor bolt...

    @Alexbn921 Can you confirm yours is a Model Year 21 (gen2) Levo same as mine? If so, it sounds like the $2 replacement bolt, that I purchased from Home Depot (which is retaining torque nicely after a couple of rides), might actually be better, because it’s a little longer, than any of the four...
  10. Unicycle_DG

    Levo Gen 2 Lost a motor bolt...

    I snapped a motor mount bolt on MY21 Levo. It’s the one that holds the chain guide (though I understand all four motor mount bolts are the same). Looking at my owners manual, the replacement is part # is S194200012 but I don’t need the whole motor mount kit. Can I purchase just the one bolt (and...
  11. Unicycle_DG

    Levo Gen 2 Turbo Levo won't roll backwards

    MY21 TL Comp, at 3,000 miles, never chipped/de-limited, will automatically power itself on when the bike is rolled backwards. Is this the beginning of the end for my Brose motor? 6 months left on my 2 year warranty. Sent diagnostics into Specialized. Hope my LBS can get me in and out quickly...
  12. Unicycle_DG

    Levo Gen 2 Maximum seatpost insertion MY21 Levo size medium

    Manual only references minimums. I’m trying to measure, without removing my stock seatpost, the maximum insertion depth asking if I can slam a 480mm (170mm travel) to minimize stack height and lower my saddle more.
  13. Unicycle_DG

    Levo Gen 2 Maximum seatpost insertion MY21 Levo size medium

    MY21 Specialized Turbo Levo Comp (full fat) size Medium comes stock with an X-Fusion Manic seatpost diameter 34.9mm with 150mm of travel. Looking to replace with SRAM RockShock Reverb™ AXS® wireless seatpost (SP-RVB-AXS-A1). My question is: what is the maximum insertion depth for a medium sized...
  14. Unicycle_DG

    New from Ky

    What part of Kentucky do you hail from simplewon? We've got a pretty good group of old farts that ride together in and around Louisville. If you live in the area, you are welcome to join us sometime.
Back
Top