The 2 bigger pins of EP801 are silver-colored when new/free of oxidation.
I noticed that contact cleaner doesn't really help (at least alone), but 5-10 mins of electric toothbrushing and the pin looks like a new again.
For some reason only the right upper pin turns to gold (=gets oxidized)...
So my fix above worked for 8 months of winter riding every day without a single shutdown.
Today, the first longer (1h30mins+) ride in a warmer weather (20C+) caused a shut down, and also a second time today evening after just a 2min ride (after the bike was being charged for 1 hour).
Upon...
Great info, thank you.
So if the connector contact is inadequate, the contact resistance is increased which leads to overheating due to high currents and the pin turns golden, which increases the pin diameter. This in turn ruins the connector of the EP801 motor-battery harness (BM-EN801), so...
Same issue here, bike shuts down during riding randomly after 3 months after installing a new EP801 motor, no error codes. I have the standard Shimano BT-EN806 battery.
First I tried replacing the motor-battery harness (BM-EN801) but it only helped for 10 days.
I have found the root of the...
Is there any way to add a BB spacer behind the SM-CRE80-12-B 53mm chainring to fit 38T?
I added some spacers behind & in the front between the spider and the chainring, and managed to get 36T to fit instead of the stock 34T.
SM-CRE80-12-SB would have 56.5mm chainline but there's no 38T option...
After 3 years of charging the battery to full every day, even when the temperature where the bike is as low as 5C (and the battery colder than that after riding e.g. in -10C), the battery lasts for only around 1,5h while a new battery lasts for 3 hours.
With the old battery I never removed the...
OK I found 2 instruction videos, the second one finally clears things up:
Unfortunately on the second video there are only 9 views as I posted this, the link was found on the merida bike model page under "VIDEOS". So many covers have been lost by users worldwide because there are no proper...
Hello,
are there instructions on how to properly attach the battery cover so that it won't fall ?
I've got eONE-SIXTY carbon (CFA II frame) 630Wh 2021 with this cover:
On this video the cover is removed (and not attached) by pulling up, but by doing so the upper part gets locked (as shown...
After 2 years, my EP8 has a kind of grinding when riding.
Removed and cleaned the pedals, cranks and chainring, no help so it comes from inside the motor.
Is it bearing noise?
edit: the motor gave in after 3 months of having this noise, no longer providing support.
OK, so the bike has a NX cassette (PG-1230), which is special as it fits Shimano 8,9,10,11-speed splined driver freehubs.
GX cassette and up are XD driver only.