sharkimano's latest activity
-
It's not a belief. If you change the diameter on flow app, you'll change the speed limit (~1km/h). -
sharkimano reacted to rearwheelcircumference's post in the thread Delete this thread admins with
Like.
Actually, there are two different wheel circumference parameters: A firmware parameter set by the manufacturer: The power assistance... -
sharkimano replied to the thread Delete this thread admins.Okay I see what you are saying and may be it is exactly how you describe it. However, since I come from a Computer Field where I spent...
-
sharkimano replied to the thread Delete this thread admins.Assuming the wheel size is set in the configuration in the FW, if the person decides to use a different wheel size then the spec limit...
-
sharkimano replied to the thread Delete this thread admins.Ok but who sets the wheel circumference in configuration ? I assumed it was done in Flow app and that the motor derives the speed based...
-
sharkimano replied to the thread Delete this thread admins.I find this odd. So setting to a bigger "Wheel" value gives you more support at higher speed ! This is counterintuitive since motor...
-
sharkimano replied to the thread Delete this thread admins.You are correct. I think I meant to say it Over reported speed not under. Reducing wheel size should also reduce apparent speed...
-
sharkimano replied to the thread Delete this thread admins.I have 29" Wheels. By this I get: 29 x 25.4 x 3.141592=2314mm Wheel Size. However since there is few inches of Tire Thickness the...
-
For anyone who switched from an EU setting to US, have you had any success changing the wheel circumference to draw out any extra speed...
-
sharkimano replied to the thread Delete this thread admins.Thank you for the tip. However I did that, reset at the custom screen but it still shows 19mph in imperial units and 32kph in metric...
-
If you press reset in the custom screen for that speed setting, e.g Emtb+ etc it’ll show 20mph. It did this before the mod as well (...
-
This is how the power limit works in the US version—at least in Bosch controllers. It provides active assistance up to just over 30...
-
sharkimano replied to the thread Delete this thread admins.I am just curious. I got the same update done to convert to USA region with 32km/h limit. (Though in miles it shows 19mph !) However my...