Hi all, rebuilding bike after 3 weeks of being apart and can’t remember how the spacers sit .
I’ve put them 3 below clamp and 1 above.
Can someone please clarify this is the Correct setup please?
Many thanks
Let me know how you get on?
I didn’t have any issues with mine.
I spoke to specialized and tf tuned before I ordered to make sure I got the correct spring for bike and rider.
The ttx 22m has the 2.5” stroke.
Slightly different spring diameter depending on tention on spring.
Mine turned up...
The spring is exactly the same.
Just checked part number of my old spring. 18074 -10 457lbs spring
18074-13 525 lbs spring
Same part number apart from the last two . Thats to do with spring rate.
You won’t hsve any issues with new spring.
Exactly the same ?
the ttx is also used on the enduro and the spring rate would be the same.
Obviously the weight of the bike is different but the lbs of the spring will be the same.
I believe the spring rate goes up in 23 lbs increments.
As I said I previous posts.
Spring had to be wound right in to a...
I spoke to a specialist who supplied the ohlins springs.
I had the 457 lbs spring on my medium Kenevo and the sag was well off.
They suggested the 525 lbs spring which stated on the chart.
Fitted 525 lbs spring and could get correct sag within 2 complete turns of adjuster on coil which it’s...
Hi Davajn, so there is a 100 kg spring or a 108 kg spring.
I’d suggest the 108 spring, with your full riding kit you’ll be around that weight.
The 108 spring is the 605 lbs.
Will make a massive difference on the way the bike rides. Hope this helps.
Hi Villho, on the 457 lbs spring, it was wound pretty much to the end of adjustment to achieve that sag.
On the 525 lbs spring, I wound the the adjuster down so I had slight tension on spring and then two complete turns achieving 28% sag.
That 457 lbs spring is designed for 11stone 2 rider...