Rob209's latest activity
-
RRob209 replied to the thread Avinox M2s rattle.I have been in contact with the shop for the last 2 weeks & they seem reluctant in doing anything, they said it’s just free play before...
-
RRob209 replied to the thread Avinox M2s rattle.Yes, I have checked everything, motor mount bolts, pivot bolts, crank arms & chainring
-
RInteresting anecdotal experience, especially after a second ride. I tested the M2S on two 3-day brutalized test bikes at Sea Otter and...
-
RMrs levity and I have Avinox M2S equipped bikes (Pivot Amp’d), and they’ve been “TQ quiet” so far. We have about 200 miles on them about...
-
RHey Rob - I tried this on each of our Pivot Amp’d bikes, and the chain won’t move back and forth at all. No rattle like you observe. As...
-
RRob209 replied to the thread Avinox M2s rattle.That’s the first thing I checked when it came up with the fault & all is good, it’s an intermittent fault which happens a few times on a...
-
RRob209 replied to the thread Avinox M2s rattle.Not good is it, Avinox saying the motor is quiet when it’s almost the same noise as the M1. Have had a speed sensor fault as well. Bike...
-
RRob209 replied to the thread Avinox M2s rattle.Here is a video of the rattle, by holding the pedal & moving the chain can replicate it
-
RAnybody with the M2s have a rattle? Mine started rattling on the second ride, it does it while coasting over rough ground anything from...
-
RRob209 replied to the thread Amflow speed sensor 0x2701006f error code.Mine has the same error on an M2s, only on the second ride in dry conditions. Have checked everything & all seems fine.
-
-
RRob209 replied to the thread No Boost on my new M2s.Yeah, mine is a speed sensor fault. Happened today only on the second ride of the bike. I’ll be in contact with the dealer tomorrow.
-
-
RRob209 replied to the thread Bosch CX Gen5 Motor Clutch clunk/engagement issue AFTER a descent?.When it does it there is no motor assistance at all & there is no output to the chainring. I can still pedal fine until it finally kicks...
-
RRob209 replied to the thread Bosch CX Gen5 Motor Clutch clunk/engagement issue AFTER a descent?.- YouTube Is this the same fault as everyone else is getting? This is happens quite often on the trail usually after a rough decent &...
