Recent content by oripaamoni

The Garmin gets 5v and the AXS is fed with 8v

It's a bit of a custom hodgepodge. So I had to Dremel out the center of the K-edge mount to make room for the 3d printed pogo pin holder and then purchased the garmin power pack mount. Garmin does now sell an off the shelf solution for this part though. Garmin Power mount

Got it all wired into the bike with a step down regulator and went on a ride, Happy to report everything seems to work well.

yup yup! Both the battery block insert and the Garmin insert were printed.

I checked the voltage on my AXS battery fully charged was 8.4v so it looks like it's a 2s battery. I have been trying to source the correct cable for months now from Trek and SRAM for my Ex-e but I keep getting the run around and nobody can tell me what the part number is. After seeing the cost...

Same issues here. Very annoying. Seems like a garmin issue because when ebike field doesn't work my tyrewiz data field doesn't work either.

I use the 830 with my levo and it works great! Connectivity is very reliable (the tyrewiz... not so much) I would also recommend using the Ebike field connect iq app.

I will grab some picture of the other configurations tomorrow.

wasn't able to get it connect today, but you can still tell by the size of the "--P--"

Thank you for the update! I have this working well on my 530, One request if possible is to increase the text size when displaying both fields in the small box. On my 520 it was nice and readable on the 530 the percentage and mode are tiny.

I did the same thing, Ended up just buying a new chain guide and swapping the whole thing.

From my understanding the openings only allow debris in connector area not to the internals of the motor, its safe to say that the openings didn't cause my issue. Dealer asked me if i had de-restricted the bike which I though was interesting.

Anybody have a motor failure let? I have 550 miles on the my 2019 levo comp. Dropped it off Friday at the shop, They think I need a new motor as well. You can hear the motor spin up to max rpm when you been to pedal but the motor is applying very little force to the crank and slips. Failed sprag...

my bad, found it! Thank you.

For me when I would restart my edge 130 it would work for a minute or two and then freeze up (2019 Levo) I returned the edge 130 and now have a 520 plus and It works great with no freezing data issues. I sent a donation a few days ago, how do I go about obtaining the pin?