I'm writing this to spare someone else the hell I'm about to go thrue with the shop.
Z8 motor, and probably any other, are not compatible with kross hex 4.0 bike because of the way how the hydro brake lines and derailer wire outlets underneath are designed :-(. see pic. I have no idea now what...
It's not just rerouting the cables, that is maybe doable, but the problem is there is a metal alu piece welded and there is apsolutly no way z8 can feet there without cutting the frame wich is out of the question.
I'm writing this to spare someone else the hell I'm about to go thrue with the shop.
Z8 motor, and probably any other, are not compatible with kross hex 4.0 bike because of the way how the hydro brake lines and derailer wire outlets underneath are designed :-(. see pic. I have no idea now what...
I'd like to ask about different firmwares beside stock. What types/options are there, what equipment is needed and how dangerous is it aka do you brick your system if failed while flashing/programing?
I can see mentioned something about facebook firmware and something called OSF?
I see your point. And also I have to check if it is even possible to use the bike once the battery tray is installed or is it in the way of the clamp system. I presume you cant grip around frame on the underside and over the battery tray on the uper side of the clamp.
I'll weight the hole bake...
I know that the rule is not to use roof racks/holders for ebikes because of weight, but can they be used with custom bike that only has additional 3,5-5kg? With battery removed offcourse.
My KROSS HEXAGON 4.0 is about 15kg original, with z8 that's almost 20kg. Is this acceptable?
thanks.
Just for everyone info, I'm shocked with client relations by the syklo company.
First I asked them why they don't have option for sending to Croatia, and this is response:
"Unfortunately, we do not ship outside of European countries."
My response, "Croatia is part of EU for about 10 years...
Hi Greg, I researched syklo option - Plate adapter 130BCD + 38t (55€) that I wasn't aware before you mentioned. Do I require any additional pieces for this set as I need with ebikestuff set (cover (optional), bolts)?
what are pros/cons between these 2 sets except syklo is much cheaper AFAIK.
thank you for your input.
what would be your advice regarding additional mentioned pieces?
I'm not so much concerned about the noise, but I am about logetivity, and I'm a new eBike user so I have to get a hang of all this new stuff nad info.
I've installed the z8 (no additional pieces, all...
One other question, if I may,
Do you have any comments/input/confirmation... for this combo:
TSDz8 motor + bike KROSS HEXAGON 4.0 (M size, 29" tires) + TSDZ8 chainring adapter 130BCD 11mm offset + TSDZ8 narrow wide chainring 38T + TSDZ8 chainring cover 130BCD + TSDZ8 chainring bolts 7mm - 12mm...
when you say ..."trigger the cutoff permanently", do you meen permanently, as in while it's connected, or permanently like in ruined system :eek: ?
not sure I understand how to check if it's proper.
can you confirm for me with your endless knowledge, are magnetic brake sensors for hydro brakes, and gear shift sensor for bafang (3pin, yellow), also compatible with tong sheng system, specificaly TSDZ8 motor?
thanks
hi guys.
I'm building a new bike with TSDZ8 750w + 13mAh (display EKD01).
I'm actualy transfering it to a new bike (old bike Nakamura Fusion 20 with V brakes, used the motor for about 150km) I'm about to buy today or tommorow and need your inputs if you have some negative stuff to point out...