You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
Yes I saw your earlier post giving that spec. My reference to the XS 1270 was in response to claims of a generic SRAM issue by e13. I...
-
Karve RSX is 1275.......Karve RS is 1270.
1270 is the budget option. Dont swallow all the marketing hype. Looking at the component spec...
-
Grease splines only, locktite to thread. See video.
-
There are 2 areas on a bike frame that have to withstand the most stress. The top tube has to wjthstand compressive forces....hence...
-
Really? The only reason the XS 1270 is in the range is to provide a 12 speed T Type cassette that fits a HG freehub where there is no...
-
Just noticed that in my previous posts I kept referring to the locknut but in case there is any confusion, the SRAM cassettes locking...
-
If you check the SRAM Service site you will find the installation and removal procedure for the XS 1270 cassette. It includes the fact...
-
I think the difference here is that the threads on an XG type freehub are on the outside of the freehub body and there are more of them...
-
If grease had been applied on a splined freehub on the threadlocked threads, just vibration would loosen the locknut and the rider...
-
I dont know the Santa Cruz range of bkkes but it looks like the Vala is fitted with SRAM XS 1270 cassette. So T Type compatable with a...
-
DJI is the parent company not the brand. Amflow is the brand. DJI developed the Avinox motor and system. Their electronics experience is...
-
So e13 have had 8 failures. None failed again when a new cassette was fitted....well you had a new cassette and it failed. They are...
-
no....a shop demo bike has either just been a display bike or one that a few prospective buyers have done a few short rides probably...
-
no....a shop demo bike has either just been a display bike or one that a few prospective buyers have done a few short rides probably...
-
It is not about price....it is about keeping friction to a minimum. The ebike centre has a solution however. One issue with motors is...
Like.
Grease splines only, locktite to thread. See video.