Recent content by Jedipip

  1. Jedipip

    Who's got the highest mile bike & motor?

    Trigger’s Broom! 😬
  2. Jedipip

    Who's got the highest mile bike & motor?

    7900 on YT Decoy. Original motor. Just turned 3 years old. 3 chains and 3 cassettes/chain rings. Wax is your friend! As is not cleaning the bike after every ride.
  3. Jedipip

    YT Decoy 700WH battery

    It makes a lot of sales sense to let new bike purchasers spend some more, YT aren’t the most expensive bikes on the market - plus we early adopters of the Decoy have kind of got over the bigger battery thing. I’m adept at big 40+ mile days out with 3,500ft of climbing now. I just want to do it...
  4. Jedipip

    YT Decoy 700WH battery

    FOR SALE: 540Wh battery. Make me an offer. Collection preferred for obvious reasons. Prepared to travel and meet if it helps.
  5. Jedipip

    YT Decoy 700WH battery

    Go on then. I’ll have one.
  6. Jedipip

    YT Decoy 700WH battery

    🤣 So that’ll be £900 plus VAT + Import tax/customs fee + Postage (shall we call it £1500??) And after all that I’ll still have a 540Wh battery that I won’t use and can’t sell anymore as there’ll be a few of those available from Jan ‘23!! This is making my decision to ‘upgrade’ a lot easier...
  7. Jedipip

    E-thirteen rear hub bearing replacement….anyone done it yet?

    Torx The hub bearings were easy to do once you know the drive side bearing comes out last as it sits against a stop. There’s a link to the process in the thread above.
  8. Jedipip

    E-thirteen rear hub bearing replacement….anyone done it yet?

    sorted it! Bought a new e*spec microspline freehub kit. It was about £90. This ended up being not much more than a set of all the bearings needed to swap them out! I’m yet to tackle the old free hub bearings - I’ve gone with the argument the bike industry wants ‘built in redundancy’ 🤨 only...
  9. Jedipip

    Main pivot removal

    Tap it from the blind side, whilst turning the Allen key, it’ll engage and come out. Don’t be too gentle ☺️ You need to apply sufficient pressure to get the threads to engage and start moving the whole rear triangle on the axle towards the side where you are turning. It’s just sticking in there...
  10. Jedipip

    E-thirteen rear hub bearing replacement….anyone done it yet?

    It kind of does, apart from the bearing press tool isn’t available (for pushing the spacer) and that black spacer is flush with both bearings, unlike in the pic.
  11. Jedipip

    E-thirteen rear hub bearing replacement….anyone done it yet?

    yeah that’s what I was hoping for too! Both bearings are clearly visible as is the axle that runs between them. There’s nothing else to see, it’s all flush in there. A gentle tap on the shaft gave nothing away in either direction. It turns with the bearings and is only properly stuck to the...
  12. Jedipip

    E-thirteen rear hub bearing replacement….anyone done it yet?

    Yeah there’s one very large one that needs TLC to make sure it’s in place. The rest are obvious and clearly don’t work THAT well. My bearings have done nearly 4000 miles though so it’s not really a warranty job. I’ve got an email question logged with The Hive/e-Thirteen. I just need to know the...
  13. Jedipip

    E-thirteen rear hub bearing replacement….anyone done it yet?

    Rear bearings are worn and rumbling with a little play, so I will be swapping them out. But…..knocking them out isn’t straight forward! Anyone ever done it? What did you use to push the axle through? Which way did you go? It’s the V40 as in the pics and fitted to a 2020 Pro Race. 26L denotes...
  14. Jedipip

    Fox 36 29er Forks with Sram Code brakes - which way is your post mount fitted?

    Perfect - just needed to see that. (y) I have some regular 36‘s on a Canyon and the post mount is the other way around. just one of those quirky things. It clearly makes the caliper contact the disk when fitted with the words and lettering facing out. cheers!
  15. Jedipip

    Fox 36 29er Forks with Sram Code brakes - which way is your post mount fitted?

    Simple enough issue, my post mount only works when fitted one way. But I could do with seeing someone else’s to be certain. Anyone running 29ers with the Code brakes can post a pic of the brake callipers fitted to the fork? zoom in on the post mount! cheers
Top