Recent content by Ger@nio63

take them to the trails so when you get a hole you can use them😅😅

portali sui sentieri così quando trovi una buca puoi usarli😅😅

Ho appena trovato questo articolo su AliExpress: Staffa per manubrio bici Supporto per manubrio per manutenzione MTB multifunzionale Accessorio per ciclismo stabilizzatore a clip per manubrio per bicicletta https://a.aliexpress.com/_EyGjSsQ

MOBIL SHC 100🤟

the engine had 5,800 km done in 13 months I noticed the maintenance light on the display and I proceeded with the inspection the plastic gears were perfect as well as the metal ones do it yourself always pays off at any time you disassemble and repair this thanks to the online community that...

I solved it, it was a bent pin, I assembled everything and tried it, now it works without any errors, here are some photos of the engine before and after the work.

Hi guys, I disassembled and greased the Bafang M820 motor. I reassembled the motor and it gives me error 21. Before disassembling it, everything was fine. I have a doubt. Since I disconnected the controller wires, I was wondering if I need to calibrate it. Has anyone already done this job and...

Can you confirm that the fake taxi can be installed with the Best cable? I have a 36V 720Wh battery. Can I install it?

Beautiful, congratulations, how much does this build weigh? What size?

Hi, on the Cef 50 I solved it like this: a small piece of plastic cut to size, shaped with an industrial hair dryer and glued with double-sided tape.

try spraying some wd40 in the yellow cracks

Hi, there are three pins for the engine. First remove the 2 rear pins, then remove the one you mentioned. You will see that the whole assembly comes off in reverse.

I was reading the info on the C030 Display and noticed that maintenance needs to be done every 5,000 km, with a workshop key notification on the Display. I'm attaching a photo.