Recent content by GEE ARR

  1. GEE ARR

    Levo Gen 2 Developed a “Squeak”. Crank area when pedalling. Levo2019. Any help?

    Mine was one of the little clips that hold the rear brake hose to the frame. The little bolt was loose and it was creaking with the smallest amount of travel.
  2. GEE ARR

    2019 Levo Frame Bearing Kit

    Thanks Ted...Is that it just the two sizes then?
  3. GEE ARR

    2019 Levo Frame Bearing Kit

    Thanks Ted...I've always replaced with Enduro Max...Have you got the exact bearings you ordered?
  4. GEE ARR

    2019 Levo Frame Bearing Kit

    Hi everyone...I've been looking everywhere on t'internet for somewhere that sells a complete set of frame bearings for a 2019 Levo. Has any of you managed to purchase a full kit from anywhere? Failing that does anyone have a list of the sizes so I can search online for them? I've searched the...
  5. GEE ARR

    Annoying Rattle

    Sorry might work now. As you will see the lockring is tight to the spider.
  6. GEE ARR

    Annoying Rattle

    Cheers for the reply McInner1. I have taken the crank arm off but lockring doesn't seem loose. It seems to be coming from inside. Is the lockring holding something on the inside that is loose and rattling do you think? See video...
  7. GEE ARR

    Annoying Rattle

    Has anyone had this annoying rattle on their 2019 Levo. I can only really hear it travelling over the rough stuff. Any help advice greatly appreciated.
  8. GEE ARR

    HELP!!Fox Shox Mounting Kit Size

    Yes I'm sure I read that on this forum that someone has had the same issue, that's why i put it in my original post hoping that person may see this and reply with the correct size. I have discussed with the LBS and they did call TF but couldn't get a straight answer I believe. Anyway I've...
  9. GEE ARR

    Levo 2019 motor noise

    Sounds like mine...the more cadence the more high pitch the motor noise is.
  10. GEE ARR

    HELP!!Fox Shox Mounting Kit Size

    Yep I thought that might stump a few people :ROFLMAO::ROFLMAO: No one knows :unsure:
  11. GEE ARR

    HELP!!Fox Shox Mounting Kit Size

    Hi Everyone, I'm struggling to fit a new Fox Factory shock to my 19 Levo. Does anyone know if the mounting kit is either 6mm x 20.00mm or 6mm x 20.8mm? Sorry if this has been discussed elsewhere...i've searched with no joy.
  12. GEE ARR

    Torque caps

    According to the specification on the Spesh Concept Store website every Levo but the S-Works should have Specialized sealed cartridge bearings, 15x110mm thru-axle, 28h. The Roval hubs should only be on the S-Works.
  13. GEE ARR

    Torque caps

    Are you sure? I replaced my Sektor with a Fox 36. Just removed the torque caps from the hub, put them to one side, and fit my wheel onto the 36 fork. I have the base model Levo btw.
  14. GEE ARR

    Torque caps

    You don't need the torque caps. It's just optional on the Rockshox fork.
  15. GEE ARR

    160mm fork on 2019 Levo?

    I too purchased a Fox 36 as an upgrade to the base level Levo. It is supposed to be 150mm and according to the code on the back when entered on the ride fox website it is. But measuring the stanchions it's 160mm. Either way it's a massive improvement.
Top