emtbeast's latest activity

  • emtbeast
    emtbeast replied to the thread New Amflow PX April 9 specs.
    Pretty sure 700Wh is meant to replace the 600Wh as a premium option, 600Wh reserved for entry option bikes or slowly phased out(just a...
  • emtbeast
    emtbeast replied to the thread Avinox M2.
    Yes 👍 good math, I already also wrote in one of the threads about these possible REx. I had a brainstorm about the possible form factor...
  • emtbeast
    emtbeast reacted to Zimmerframe's post in the thread Avinox M2 with Haha Haha.
    I think we know all there is to know about the motor .. but as for the rest, maybe this helps with the LEVO 4 thread (though I only did...
  • emtbeast
    emtbeast reacted to gido's post in the thread Avinox M2 with Agree Agree.
    Maybe new Molicel INR-21700-P60C, 20 x 75 g, = 1.5 kg cells + case, BMS for total 1.8 kg 432wh or even Molicel INR-21700-M65A for 468...
  • emtbeast
    emtbeast reacted to Rando_12345's post in the thread Avinox M2 with Like Like.
    No, the 800wh is 3.8kg
  • emtbeast
    emtbeast replied to the thread Avinox M2.
    A 900Wh(max 940Wh) is definitely possible already a lot written about it. Slightly less capacity(6,2Ah) cells would equal to 900Wh. Or...
  • emtbeast
    emtbeast reacted to Rando_12345's post in the thread New Amflow Models? with Haha Haha.
    Well actually, I only ride straight up the cliffs of Moher and I say if your rides don't require a 90 degree seat angle then you might...
  • emtbeast
    emtbeast reacted to sethimus's post in the thread New Amflow Models? with Agree Agree.
    the longer your legs are, the slacker your seat angle gets with an actual sta of 70°. learn math....
  • emtbeast
    emtbeast replied to the thread New Amflow Models?.
    You don't understand buddy. You don't want to or just don’t know the difference between the real/actual STA and effective STA. Yes the...
  • emtbeast
    emtbeast replied to the thread New Amflow Models?.
    I'd say it's only optical, as it's a black frame on the unno, you dress black if you want to look thinner.
  • emtbeast
    emtbeast replied to the thread New Amflow Models?.
    The 800 and 600 are both 49mm in height. Add the downtube wall thickness and some wiggle room and you get what you measured. ✌️ The...
    • Screenshot_20260401_205240_Samsung Notes.webp
  • emtbeast
    emtbeast reacted to B Rabbit's post in the thread New Amflow Models? with Like Like.
    This is the 800wh battery in the new Mondraker, it looks very thin in the photos, but maybe a bit wider.
  • emtbeast
    emtbeast replied to the thread New Amflow Models?.
    For those wondering about the new bikes(700Wh) downtube dimensions. This are the current 600Wh and 800Wh battery dimensions and cell...
    • 20260401_172806.webp
    • 20260401_172813.webp
  • emtbeast
    emtbeast replied to the thread New Amflow Models?.
    No, the kinked seat tube angle read again bro 😉. Where I ride the terrain is steep(skiing area), the Average terrain incline is 9%. A...
  • emtbeast
    emtbeast replied to the thread New Amflow Models?.
    This thread, page 3, post #76
Show older items
Back
Top