Hey @Mcdon001 - The existing turbocharger also works on the new Avinox motors.
We don't have clear crank compatibility info on the new Amflow bikes but the stock cranks on the older Amflo bikes did have clearance issues with the Turbocharger which required an e*thirteen crank to be used. (The...
Hi Steve,
Chris from e*thirteen here. Sorry to see the trouble with that hub. The wheel you have there is a VERY old wheel (from production ~10 years ago). Our hubs have improved greatly since that version and Id gladly get you set-up with one of the newest versions. Could you drop us a line at...
Hey folks,
Chris from e*thirteen here. As @Suns_PSD mentioned, we do have the New Turbocharger guide available and it was specifically designed to protect chainrings on a few of the low-power bikes where the ring is less protected from the motor casing/housing. Bosch and EP8 motors which have...
Hey Rick,
To clarify, an early production batch had some issues with the pinch bolt. The issue was caught early on and very few of those cranks ended actually made it to market. That has been rectified for sometime now and the current carbon cranks have largely been problem free. While we do...
@TommyC - Sorry to hear about the issues. There seems to be a combination of factors which are causing that issue on a small qty of this specific Cube model. Moving out the chainline improves the problem. Reach out to us via our warranty form here and we can get you sorted...
@jim0905 - Sorry to see about the trouble with the ring. File a warranty claim with us here and we can get a new one sent out right away.
https://support.ethirteen.com/hc/en-us/articles/360038827791-Warranty-Request-Submission-Form
Shjay,
The crank arms themselves are the same. When they are installed on E7000 or E8000 motors, a spacer is used to achieve correct spacing and preload. The arms themselves are the same. The assembly as a whole is not. Have a look here to see how the configs are different...
Hi All,
Currently we have 2 Technical Service Bulletins related to e*thirteen cranks being used with Shimano EP8 Motors.
The first relates to arms loosening. This issue generally occurred on bikes which were assembled outside normal assembly factory settings which in some cases resulted in...
Hi Spiff,
We do not believe our cranks to be the source of the spindle failures. We have just issued this Technical Service Bulletin regarding this issue...
Currently we are seeing a shortage of carbon cranks. Customers with issues with carbon cranks are being given a set of alloy cranks to use until the carbon are available. Once the carbon are available, customers are shipped the carbon cranks and can keep the alloy cranks. The carbon cranks use a...
@Zimmerframe - As you said, our bars are fairly standard with regards to rise and sweep options. Nothing too out of the norm. Our "Plus" level bar is our nicest alloy bar we make and what we would recommend if you are looking for an alloy bar over a carbon. It's a no-frills, high-end alloy bar...
Hey NorthernBloke - If you are having trouble getting a resolution from Orbea and your retailer, please fill out a warranty request with us here: Warranty Request Submission Form
Please note in your request that you are having issues acquiring the parts thru Orbea and that you were sent to that...
@DarrenCC - Sorry to hear about the trouble. Our team will get you sorted thru the warranty claim process. Please send a DM if you have any trouble and I can assist with facilitating.
@Richiefromboston - We have some sizes up on our webstore and we are in the process of getting the steel rings added. Ill drop you a DM to see if I can assist with a resolution.