Recent content by Dirtyrig

Fox Float X, I started with .7 spacers and incrementally ended with none. With all the additional air pressure, just to get the sag to 30%, I found the spacers were not needed anymore. The link increases ending stroke progressiveness so it makes sense, I'm not bottoming out the shock except...

I tried many different configurations, I'm pretty good at tuning suspension and I don't completely dislike how it feels. If you need the rear to be in the 25 to 30% sag range the increased spring rate messes with the ride feel. To me the softer top end and what feels like less mid stroke support...

Yea, I've removed all volume spacers because the cascade link makes the suspension more progressive, so it wasn't needed, but volume spacers don't change mid stroke support. The first 30% of the travel is absolutely useless with the link, it blows through the initial stroke way too easy. This is...

I've have the link on my 21 Rise and honestly I don't like how it makes the bike feel. I have to add almost 40psi more in the shock to get proper sag and mid stroke support feels compromised. If you climb technical trails, the cascade link may not be a good option. The increase in small bump...

What did you do to derestrict?

Did this fix your E914 issue?

I'm 180lbs, 190 with gear, using a Marzocchi Bomber Cr with a 400lb spring, I get around 28% sag, 30% sitting.

Has anyone ever asked Bosch to derestrict the motor? I'm curious, if you own your own land and want to ride your bike on your own land derestricted, would Bosch allow the changes to be made on the motor? I understand the warranty would be void, but you would not be breaking any laws so would...

It's crazy thinking that the belt can last the life of the bike, imagine that!!! 😳

Thanks for the help and the offer!! If I lived closer I would take you up on that offer, but I live in new york. I've been discussing this with Troydon and he's trying to find me someone that may have a RH3 that lives close to me. I think I would be fine on either a RH3 or RH4, but prefer a...

This is a weird question, but do you know the measurement from you middle knuckle to your shoulder bone with your arm extended foward?

I'm about same as you and can't figure out what size to get, I'm 6'1" with 35" inseam (with shoes on).

How tall are you and what size did you get?

Do you think ST Unlocker will work with the EP801 eventually?

If I update EP8 to the new firmware 4.1.10 will it reset any changes made with Stunlocker and has anyone updated to 4.1.10 that has used Stunlocker?