Recent content by davemcc1248

Good tip thanks was about to take my bike to a shop saved me the trip. Had been in contact with YT uk but they need mention to do this. Had bought a new headset to go in thought no point taking old one out and not replacing it. The cheapest place to get a full headset is direct from YT uk £58...

Company called WEECOG make bags to what size you want. Had it made for old bike but still fitted new bike.

Spring clean and service done. Forks lowers serviced new dust seals, new chain, brake pads, freehub and cassette cleaned and finally got round to rerouting the rear brake hose after 18 month's.

20mmx8mm bush for top don't need one for the bottom of shock.

Get yourself a rockshox reverb stealth barb connector so you can conect old outer to new and pull throw frame...

Try company wee cog they will make a custom bag. They made me one for my last bike an orange stage 5 and it fitted my spectral as well.

Out in Tollymore, Newcastle , Northern Ireland yesterday first good weekend weather in a while.

My spectral on came with NX eagle between broken mechs and poor shifting find the cassette get easily bent as well. Got a xt di2 shift, slx cassette, chain, di2 cable and button shifter all for £300 easy to setup have had about 8 rides know shifting is much better.

I fitted marzocchi bomber cr 260mmx62.5mm big improvement over the air shock also fitted the coil conversion kit to the fox36 rythem forks can just blast throught anything now. Only problem i had was the water bottle rubbing on the spring so removed cage and soaked it in boiling water and bent...

I had the same problem when i received my spectral on the speed sensor was not plugged into the motor.

I fitted the skf bushings and enduro bearings at Xmas so far so good I think because my bearings had failed caused the bushings to fail. The original bearings and bushings only last 3 months/ 12 rides poor quality with little grease in them.

Has anyone rerouted their rear brake cable throught the drive side and over to the left side of their bars for U.K. and if so was it handy or not. Thanks.

I had same problem when bike built out of the box turnef out the rear speed sensor was not plugged into the motor. On non drive side at bottom of motor remove cover 3or 4 bolts and just check it is plugged in correctly.

Have had my spectral on 6 for about 4 months. Getting bike ready for New years day spin noticed play in the bushings checked bearings and the ones top of horst link seized and bottom ones not much better. Contacted Canyon and got back replay (For all of the bearings to seize after 4 months of...

Simplybearings do the SKF version PPMF 101212 for £3.28 a pair and GFM-1012_10 for £5.26 a pair plus vat and £1.50 delivery. I have ordered both and will try the SKF ones first to see if they will last any longer .Also bought the max enduro bearings to try . Used them in my Orange before and...