Recent content by ctcampbell

I haven’t that I’ve noticed but that’s a good call.

Replaced no, but in the grand scheme of things it a relatively new bike, bought late last summer.

Magura have a new bleeding video on their YouTube, released a few months ago. I’ve used it with my MT7s and Gustavs and both rear brakes are now perfectly solid bite point. Funny thing is I can’t think of anything different to what I was doing before but maybe the ‘bleed the master, then bleed...

I can highly recommend a hose on a reduced power, but enough to get the dirt off, and the Peaty's brush set. The bog brush in particular is superb. I use their Loam Foam but Muc-off's equivalent is fine too.

Is this normal? The chain stretch on the top three big cogs seems quite intense so maybe it is, but it really doesn't sound good.

Right, but you still have to run a cable; instead of the sensor that goes on the valve which doesn’t need a messy cable. What am I missing?

Don’t you have to run a sensor cable to near the rotor for that to work?

I can't say I've noticed anything negative on my Bullit in this regard, what would this change mean for me?

I just updated. Had to do a full firmware update once, then go back into the updates page and there was another ‘performance update’ waiting to be installed.

It seems this is dead before arrival? Facebook page hasn’t updated since 2024, website is expired, and their insta only has one post on it.

They are straight but it doesn’t take away the noise as the pad is basically rubbing against the rotor for the entire wheel rotation. They seem to be silent now after my very small adjustment anyway.

Nope, bite point was solid as a rock.

Gave it a go, better but not perfect. I had to slightly adjust afterwards to account for a piston that won’t retract fully. Interestingly this happens on both calipers, and it’s the same piston on both. Looking down on the caliper it’s the front/top right piston. I lubricated the front piston...

I did actually buy one of those when I got the new master, fingers crossed it works.

Well, I had a total brain fart yesterday and blew the master seal out of the housing on my front brake. New master arrived today and that was the easiest thing to fit ever, fair play to Magura they have done a great job with easy link. With the safety of a new master fitted I tried to take the...