Recent content by Chris525uk

@Major Stare What you have is correct. You will need spacers, normally 30-40mm. You will also need to buy a top cap. Would let someone else confirm though.

Ah nice one. Been looking around now i know the numbers. Looks like hope do them as well. Nukeproof has the shape im after but sadly they dont have the top part for the cubes :( Anyway thanks for the help il get these on order soon!

Thanks for replying. Yeah that would be alright better than looking flat. However canecreek dont ship outside of US/canada by the looks of it. :(

Hi Guys, thought id dig out this thread again instead of starting something new. So over the weekend i cleaned my bike and as i was rolling my bike in the garage on the back wheel my dad decided to hold my fork and wiggle it back and forth and i have so my pay in my headset! I didn’t even...

@johnf0246 after my ride it didn’t go away. Put in my old pads and that solved the problem. So looks like an issue with the new pads. thanks again for all your help :)

only slight noice as the pads are slightly touching the rotor but with some wear and use im sure it will free up a bit… adaptor is 100% correct can only go on one way with the arrow stating “UP” im going to go out on it tonight and see if it beds in more. Il probably go over the bars or...

Hi. Just check and they are clear from the black part from the disk… also checked the wear on the disk and its the same as the original rear rotor. So thats all good

@Gyre @johnf0246 Thank you both! I now have the bolts and its fitted to the bike! 1 last question though i was bedding the new pads and rotor and noticed a knocking noise when coming to a stop… i can only describe it as a woodpecker pecking at a tree haha. Is this a normal sound from the...

did google that. Lots of options came up. Hahaha no worries thanks for your help il just go to my local bike shop and see if they got any. cheers

I don’t suppose you know the name of this type of bolt so i can search for them? im starting to think this 220mm disk really isnt worth it haha

@johnf0246 i bought that adapter looks like it will be the correct one. however the original bolts dont fit. Would you know which ones i need? The ones that are supplied (smaller ones in the photo) fit into the fork which is fine… but my original ones that were in the adapter are to long… can...

Thank you all. Looks like the shop gave me the wrong one then. I will try QM45. :)

Hi guys, just looking for some help as it looks like i have been provided with bad knowledge. so i have a magura MT7 stock set up on fox 38 forks 203mm rotors. I wanted to upgrade to 220mm. I was told to get the QM46 adapter. But this doesnt seem to work the rotor will push the Calliper out to...

thanks for the reply. But i did state its a 175 min euro spend and i will get as close to that as possible. so i dont think the below £135 limit would apply to my questions. But always good to know. Thanks :)

keep me up to date mate, curious how much this will end up costing me.