STEP files - surprisingly not easy to import to Blender. Can anyone supply a model of the cover plate in OBJ, STL, or DAE format? Or .blend for that matter.
Yeah the 860c display is awfully large, a friend of mine has one. Do you have a thumb throttle? if so how does the throttle cable hook up? On my little dpc241 display it actually plugs into the back of the display so there are two plugs.
These are photos of the 960 kWh pack, with the BMS board being moved to the side where the ends of the cylindrical cells are. Note some wire splices to lengthen. I re-shrink wrapped the whole thing and I believe when inserted into the frame,the side with the BMS board is up against the top wall...
I happen to be metal sculptor so bending a bit of aluminum something I do constantly. I used 1.5mm (1/16") thick. The bigger issue was screwing it to the frame, had to epoxy 4 screw mounts top and bottom to frame. I also had no use for the giant hole in the side of the frame so I ended up...
I have built an LCES 004 in late 2021. I was inspired to get this frame after seeing KaroKönig and his beautiful creation. It is working very well for a few months now, it is now April '22, about 400 mi clocked. I took a 20 Ah 960Wh 48V pack and managed to shoehorn it into the frame and built an...