A.Collins1981's latest activity
-
A.Collins1981 reacted to Greg Watts's post in the thread Gen 4 Bosch motor creaking under load with
Like.
@A.Collins1981 - that's the result right there. 20 miles up and over the Downs with the motor under proper load and not a creak to be... -
A.Collins1981 replied to the thread Gen 4 Bosch motor creaking under load.Morning gents so took the bike for a proper ride early this morning to avoid the heat 🥵 just under 20miles up and over the downs And...
-
A.Collins1981 reacted to Stihldog's post in the thread Gen 4 Bosch motor creaking under load with Like.
That’s good news. Hopefully that solved the noise issue …and may have saved you $$$ and grief and worse …riding time. 😉
-
A.Collins1981 reacted to Greg Watts's post in the thread Gen 4 Bosch motor creaking under load with Like.
@A.Collins1981 - now we wait. 🤞
-
A.Collins1981 replied to the thread Gen 4 Bosch motor creaking under load.Will do 🤙🏻
-
A.Collins1981 reacted to Greg Watts's post in the thread Gen 4 Bosch motor creaking under load with Like.
@A.Collins1981 - excellent news. No creak on a flat pootle is a promising start, but you're right to reserve judgement - the real test...
-
A.Collins1981 replied to the thread Gen 4 Bosch motor creaking under load.hello so far it’s good news took it for a quick ride earlier and no creaking noise 🥳 but was only on level ground and only to the pier...
-
A.Collins1981 reacted to Stihldog's post in the thread Gen 4 Bosch motor creaking under load with Like.
That bar ^^^, makes the bike colour look awesome 😎 👍🏻
-
A.Collins1981 replied to the thread Gen 4 Bosch motor creaking under load.So bike is back giving the frame mounts 24 hrs to cure will 🤞 have good news either tomorrow evening or Sunday morning either way gents...
-
-
A.Collins1981 replied to the thread Gen 4 Bosch motor creaking under load.I’m around 85kg so shouldn’t be a weight issue plus the bikes 5 years old so warranty is long gone
-
A.Collins1981 reacted to Greg Watts's post in the thread Gen 4 Bosch motor creaking under load with Like.
@A.Collins1981 - that's a genuinely satisfying update. Four of eight bolts turning at 8Nm means they were well under-torqued, which is...
-
A.Collins1981 replied to the thread Gen 4 Bosch motor creaking under load.So an update the ts25 Torx bits have arrived I’ve taken the bike apart again cleaned all the mounting bolts and mounting points with...
-
A.Collins1981 reacted to Greg Watts's post in the thread Gen 4 Bosch motor creaking under load with Like.
@A.Collins1981 - good instinct on the year, and yes, your 2020 Scott does have the original bracket screws (not the later updated spec)...
-
A.Collins1981 replied to the thread Gen 4 Bosch motor creaking under load.the bike is 2020 so I’d assume (yes I know assume nothing) Ok so worst case scenario and the bolts or the plate are misshaped and...
-
A.Collins1981 reacted to Greg Watts's post in the thread Gen 4 Bosch motor creaking under load with Like.
@A.Collins1981 - good lad. The TS25 is exactly what you need for those bracket screws, and checking them is the right next move. One...
