Levo SL Gen 1 Levo/Creo SL Chain Ring Spider Loosened

brizi2003

Active member
Nov 20, 2018
233
143
Whickham, Newcastle upon Tyne
I noticed the chain ring on my 200 miles from new Creo SL had some play. On closer examination the chain ring carrier retaining clip didn't seem properly located in the groove but the retaining bolt was tightened to torque spec. I removed the chain ring spider completely, refitted the clip and retorqued the bolt to spec. Now all seems good, but I'm wondering if anyone else has had a similar experience?
 

FireWithin

New Member
Oct 7, 2021
13
2
Montreal
Any slight play in the bottom bracket when wiggle in the green arrow direction (see picture) using both hand on each crank arm?

Thanks for some feedback.

Creo crank color.jpg
 

brizi2003

Active member
Nov 20, 2018
233
143
Whickham, Newcastle upon Tyne
I had another problem with my Creo SL crank 'clicking' when pedalling uphill under load with or without motor assistance. Turned out to be the un-greased motor/frame interface. Lesson learned: Grease the motor/frame interface and re-torque the motor mount bolts once in a while.
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

518K
Messages
25,445
Members
Join Our Community

Latest articles


Top