Dual Crown Fork - Problems

MTB_MIKE

Member
Dec 20, 2019
98
95
Southern California, USA
Trying to fit a RS Boxxer 29er, 46mm offer fork on the Decoy. Changed the Air spring to 180mm and purchased a 1-1/2 to 1-1/8 headset adapter to be able to run a 1-1/8” Straight steerer tube through the headtube but the stopper thing is blocking everything from working as it should. Any ideas what to do?

BBD7BD92-69B0-4D3A-BE7C-6BED224B4CEA.jpeg


AE884F7C-330C-46A4-8E33-6DB83134FF19.jpeg


CFA2827C-FDAC-4207-BDE0-42097383FF5E.jpeg


A3529EF9-215A-48C0-BC96-C53682DD430F.jpeg
 

MTB_MIKE

Member
Dec 20, 2019
98
95
Southern California, USA
Removing that dovetail would probably fix the problem and allow a 1-1/5 headset to fit in that pocket which means there’s two of them stacked on each other. It would work and the 1-1/8 to 1-1/5 crown race that is installed on the boxxer’s steerer tube would be able to be installed.

I tried yanking the dovetail with some needle nose pliers but it’s probably pressed fitted a d possibly glued on tight :(
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

518K
Messages
25,436
Members
Join Our Community

Latest articles


Top