• Warning!!

    Riding a tuned or deristricted EMTB is not a trivial offence and can have serious legal consequences. Also, many manufacturers can detect the use of a tuning device or deristricting method and may decline a repair under warranty if it was modified from the intended original specification. Deristricting EMTB's can also add increased loads for motors and batteries. Riding above the local law limit may reclassify the bike as a low-powered bike, requiring insurance, registration and a number plate.

    Be aware of your local country laws. Many laws prohibit use of modified EMTB's. It is your responsibility to check local laws. Ignoring it, has potential implications to trail access, and risk of prosecution in the event of an accident.

    UK Pedelec Law

    Worldwide Laws

    We advise members great caution. EMTB Forums accepts no liability for any content or advice given here. 


Derestricted Shimano and gearing?

Hasse Birkmose

New Member
Jul 19, 2019
93
42
Denmark
Have yet to receive my new bike. Wanting to derestrict since i will be riding trails in the weekend AND commuting to work (tarmac/gravel/forest) almost every work day. Highest gear on the bike is 11 in the back and 32 front. The plan os to go with Sram NX Eagle and a 38 ring in front. This way it will keep a decent low gear (50back/38front) and a higher top gear (11back/38front)
NX Eagle will hopefully also provide a cheaper cassette and possibly stronger - read that it is the only Sram cassette officially emtb approved - might be wrong :)
The bike will be covering a lot of ground in all conditions year round even road salt in winter YIKES!!!
Any thoughts?
Thanks!
 

Cuddles

Member
Apr 22, 2020
24
2
North Vancouver
bump - wish I could Help; solid questions; interested in the answers b/c im also interested in similar drivetrain upgrade for my RM - Not sure I can even fit a 38 up front; but would like to know if anyone has done the upgrade your talking about to see if its even a worthwhile route to pursue with my set up.
 

Darius1502

New Member
May 30, 2020
18
5
Austin Texas
Have yet to receive my new bike. Wanting to derestrict since i will be riding trails in the weekend AND commuting to work (tarmac/gravel/forest) almost every work day. Highest gear on the bike is 11 in the back and 32 front. The plan os to go with Sram NX Eagle and a 38 ring in front. This way it will keep a decent low gear (50back/38front) and a higher top gear (11back/38front)

I think this will work. I upgraded my to a 36 up front and 'unlocked' it. I've hit 34 MPH with the 11 - 46 in the rear. But on average 30 is pretty easy.

This calculator will help you: Bicycle Bike Gear Ratio Speed and Cadence Calculator

You should be able to hit about 34 MPH or so.
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

522K
Messages
25,790
Members
Join Our Community

Latest articles


Top